Confirmed Black Mold in Union, MI:
Type III Containment & Removal

No. Many mold species produce dark or black-appearing growth: Cladosporium, Aspergillus niger, Aureobasidium, and Ulocladium are all common in Union, MI properties and all appear dark. Stachybotrys chartarum is identified by species-level laboratory analysis of a surface sample — not by color. The distinction matters because the removal protocol (containment tier, PPE level, disposal requirements) is determined by the confirmed species, and applying Type III Stachybotrys protocol to what turns out to be Cladosporium adds unnecessary cost, while applying a lower-tier protocol to confirmed Stachybotrys is an inadequate response.

Stachybotrys chartarum produces trichothecene mycotoxins that remain biologically active even in dead spore cells. EPA-registered biocides applied to Stachybotrys-contaminated drywall kill the living mold cells on the surface but cannot neutralize the mycotoxin-containing material in the substrate. The drywall itself — now containing both dead mold hyphae and active mycotoxins — remains a potential exposure source. Complete physical removal of contaminated porous materials is the protocol specified by IICRC S520 for confirmed Stachybotrys.

Temporary relocation during Stachybotrys removal is our standard recommendation for households with vulnerable occupants. Type III containment protects unaffected areas of the property, but for high-risk occupants, temporary relocation during the active removal phase is the most protective approach.

Independent IH post-clearance sampling with accredited lab analysis is the only objective confirmation method. Stachybotrys spore counts in the treated zone compared to outdoor baseline — when they're at or below outdoor levels, clearance is confirmed by the IH's written report.

Stachybotrys chartarum requires consistently wet cellulosic material to establish — not just high humidity, but material that has been continuously wet for an extended period. Common sources in Union, MI properties include: chronic roof leaks that saturate the drywall or insulation below; long-term plumbing leaks inside wall assemblies; slab leaks that maintain wet conditions on floor material above; basement flooding that isn't completely dried within 48–72 hours; and HVAC condensate leaks onto drywall or ceiling tile. Its presence is always evidence of a sustained moisture source, not just a humidity problem.